Home » Partnerships » Institutes » Lightweight Design (LLK) » Publications »

Publications by Prof. Dr.-Ing. Holger Saage

Publications in international peer-reviewed scientific journals

  1. Denk, J., Nischler, A., Whitmore, L., Huber, O., Saage, H.: Discontinuous and inhomgeneous strain distributions under monotonic and cyclic loading in textured wrought magnesium alloys, Materials Science and Engineering: A, Vol. 764, S. 1-16, 2019, zum Artikel
  2. Whitmore, L.C., Denk, J., Zickler, G.A., Bourret, G.R., Huber, O., Saage, H., Hüsing, N., Diwald, O.: Microstructural investigation of twin-roll cast magnesium AZ31B subjected to a single monotonic compressive stress, Journal of Alloys and Compounds, Vol. 789, S. 1022-1034, 2019, zum Artikel
  3. Löffl, C., Saage, H., Göken, M.: In situ X-ray tomography investigation of the crack formation in an intermetallic beta-stabilized TiAl-alloy during a stepwise tensile loading. International Journal of Fatigue, Vol. 124, S. 138-148, 2019, zum Artikel
  4. Denk, J., Whitmore, L., Huber, O., Diwald, O., Saage, H.: Concept of the highly strained volume for fatigue modeling of wrought magnesium alloys, International Journal of Fatigue, Vol. 117, S. 283-291, 2018, zum Artikel
  5. Denk, J., Dallmeier, J., Huber, O., Saage, H.: The fatigue life of notched magnesium sheet metals with emphasis on the effect of bands of twinned grains, International Journal of Fatigue, Vol. 98, S. 212-222, 2017, zum Artikel
  6. Dallmeier, J., Denk, J., Huber, O., Saage, H., Eigenfeld, K.: A phenomenological stress-strain model for wrought magnesium alloys under elastoplastic strain-controlled variable amplitude loading, International Journal of Fatigue, Vol. 80, S. 306-323, 2015, zum Artikel
  7. Dallmeier, J., Denk, J., Huber, O., Saage, H., Eigenfeld, K.: Deformation behavior and fatigue analysis of magnesium wrought alloys under variable amplitude loading, Materials Today: Proceedings, Vol. 2S, S. 119-124, 2015, zum Artikel
  8. Dallmeier, J., Huber, O., Saage, H., Eigenfeld, K.: Uniaxial cyclic deformation and fatigue behavior of AM50 magnesium alloy sheet metals under symmetric and asymmetric loadings, Materials & Design, Vol. 70, S. 10-30, 2015, zum Artikel
  9. Dallmeier, J., Huber, O., Saage, H.: Numerical Fatigue Analysis for Twin Roll Cast Magnesium Sheet Metal Structures, Advanced Materials Research, Vols. 891-892, S. 1021-1026, 2014, zum Artikel
  10. Dallmeier, J., Huber, O., Saage, H., Eigenfeld, K., Hilbig, A.: Quasi-static and Fatigue Behavior of Extruded ME21 and Twin Roll Cast AZ31 Magnesium Sheet Metals, Materials Science and Engineering A, Vol. 590, S. 44-53, 2014, zum Artikel
  11. Loretto, M.H., Wu,Z., Chu, M.Q., Saage, H., Hu, D., Attallah, M.M., Deformation of microstructurally refinde cast Ti64Al8Ta, Intermetallics 23, 2012, S. 1-11
  12. Krüger, M.,  Saage, H.,  Heilmaier, M.,  Jain, P.,  Kumar, K. S., Effect of Zr additions on the deformation and fracture behaviour of three phase Mo-Si-B alloys In: Non-linear response of conventional & advanced materials, and multi-scale modeling. - Fulton, Md., NEAT Press (2012), S. 268-270
  13. Diel, S., Huber, O., Saage, H., Steinmann, P., Winter, W.: Mechanical Behavior of a Cellular Composite under Quasi-Static, Static and Cyclic Compression Loading, Journal of Materials Science, Vol. 47, S. 5635-5645, 2012, zum Artikel
  14. Heilmaier, M., Krüger, M., Saage, H., Recent advances in the development of mechanically alloyed Mo silicide alloys In: Ductility of bulk nanostructured materials. - Stafa-Zurich [u.a.],   Trans Tech Publ., 2010, ISBN 0-87849-305-0, S. 549-558
  15. Sturm, D., Heilmaier, M., Saage, H., Aguilar, J., Schmitz, J., Drevermann, A., Palm. M., Stein, F., Engberding, N., Kelm, K., Irsen, S., Creep strength of a binary Al62Ti38 alloy, International Journal of Materials Research 101, 2010, S. 676-679
  16. Heilmaier, M., Krüger, M., Saage, H., Recent advances in the development of mechanically alloyed Mo silicide alloys, Materials Science Forum 633/634, 2010, S. 549-558
  17. Jiang, H., Zhang, K., Hao, X.J., Saage, H., Wain, N., Hu, D., Loretto, M.H., Wu, X.,  Nucleation of massive gamma during air cooling of Ti46Al8Ta, Intermetallics, 2010, S. 938-944
  18. Schneibel, J.H., Rühe, H., Heilmaier, M., Saage, H., Goncharenko, M., Loboda, P., Low cycle fatigue of Fe3Al-based iron aluminide with and without Cr, Intermetallics 18, 2010, S. 1369-1374
  19. Heilmaier, M., Krüger, M., Saage, H., Rösler, J., Mukherji, D., Glatzel, U., Völkl, R., Hüttner, R., Eggeler, G., Somsen, C., Depka, T., Christ, H.J., Gorr, B., Burk, S.: Current Development Status of Metallic Materials for Structural Applications Beyond Nickelbase Superalloys, JOM, 2009
  20. Saage, H., Krüger, M., Sturm, D., Heilmaier, M., Schneibel, J.H., George, E., Heatherly, L., omsen, C., Eggeler, G., Yang, Y.: Ductilization of Mo-Si solid solutions manufactured by powder metallurgy, Acta Materialia, 2009
  21. Heilmaier, M., Krüger, M., Saage, H.: Recent advances in the development of mechanically alloyed Mo silicide alloys, Material Science Forum, 2009
  22. Sturm, D., Heilmaier, M., Saage, H., Paninski, M., Schmitz, G.J., Drevermann, A., Palm, M., Stein, F., Engberding, N., Kelm, K., Irsen, S.: Creep Strength of centrifugally cast Al-rich TiAl Allyos, Material Science and Engineering, 2009
  23. Depka, T., Somsen, C., Eggeler, G., Mukherji, D., Rösler, J., Krüger, M., Saage, H., Heilmaier, M.: Microstructures of Co-Re-Cr, Mo-Si and Mo-Si-B high temperature alloys, Material Science and Engineering, 2009
  24. Saage, H., Huang, A.J., Hu, D., Loretto, M.H., Wu, X.: Microstructure and tensile properties of massively transformed and aged Ti46Al8Nb and Ti46Al8Ta alloys, Intermetallics, 2009
  25. Jéhanno, P., Böning, M., Kestler, H., Heilmaier, M., Saage, H., Krüger, M.: Molybdenum alloys for high temperature applications in air, Powder Metallurgy, 2008
  26. Krüger, M., Franz, S., Saage, H., Heilmaier, M., Schneibel, J.H., Jehanno, P., Böning, M., Kestler, H.: Mechanically alloyed Mo-Si-B alloys with a continuous a-Mo matrix and improved mechanical properties, Intermetallics, 2008
  27. Kelm, K., Irsen, S., Paninski, M., Drevermann, A., Schmitz, G.J., Palm, M., Stein, F., Emgeberding, N., Heilmaier, M., Saage, H., Sturm, D.: Charcterization of the Microstrucuture of al-rich TiAl-Alloys by combined TEM Imaging Techniques, Microscopy and Microanalysis, 2007
  28. Jéhanno, P., Heilmaier, M., Saage, H., Böning, M., Kestler, H., Freudenberger, J., Drawin, S.: Assessment of the high temperature deformation behavior of molybdenum silicide alloys, Material Science and Engineering, 2007
  29. Sturm, D., Heilmaier, M., Schneibel, J.H., Jéhanno, P., Skrotzki, B., Saage, H.: The influence of Silicon on the strength and fracture toughness of Molybdenum, Material Science and Engineering, 2007
  30. Dehler, A., Knirsch, S., Srivastava, V., Saage, H., Heilmaier, M.: Assessment of creep behaviour of a the die-cast cylinder-head alloy AlSi6Cu4-T6, International Journal of Materials Research, 2006
  31. Jéhanno, P., Heilmaier, M., Saage, H., Heyse, H., Böning, M., Kestler, H., Schneibel, H.H.: Superplasticity of a refractory multiphase Mo-Si-B alloy, Scripta Materialia, 2006
  32. Saage, H., Heilmaier, M., Eckert, J.: On the Orowan stress in intermetallic ODS alloys and its superposition with grain size and solid solution hardening, International Journal of Materials Research, 2005
  33. Engelmann, H.J., Volkmann, B., Ritz, Y., Saage, H., Stegmann, H., de Robillard, Q., Zschech, E.: TEM sample preparation using focused ion beam - capabilities and limits, Microscopy Today, 2003
  34. Zschech, E., Engelmann, H.J., Stegmann, H., Saage, H., de Robillard, Q.: Barrier/seed Step Coverage Analysis in Via Structures for In-laid Copper Process Control, Future Fab International, 2003
  35. Heilmaier, M., Saage, H., Mirpuri, K. J., Eckert, J., Schultz, L., Singh, P.: Superposition of Grain Size and Dispersion Strengthening in ODS L12-(Al,Cr)3Ti, Materials Science and Engineering, 2002
  36. Zschech, E., Engelmann, H.J., Saage, H., de Robillard, Q., Stegmann, H.: Characterization of Layer Stacks in Microelectronic Products: Challenges to Sample Preparation and TEM Analysis, Practical Metallography, 2001
  37. Engelmann, H.J., Saage, H., Zschech, E.: Application of analytical TEM for failure analysis of semiconductor device structures, Microelectronics Reliability, 2000
  38. Heilmaier, M., Saage, H., Eckert, J.: Formation of ODS L12-(Al,Cr)3Ti by mechanical alloying, Material Science and Engineering, 1997

 

Publications in conference proceedings

  1. Löffl, C., Saage, H.: Ermittlung von anwendungsnahen Materialkennwerten am Beispiel einer TiAl-Legierung. In: Huber, O., Bicker, M., Patzelt, P. [Hrsg.]: 9. Landshuter Leichtbau-Colloquium - Leichtbau in Forschung und industrieller Anwendung von der Nano- bis zur Makroebene, LC Verlag, Landshut, Februar 2019, ISBN: 978-3-9818439-2-7
  2. Whitmore, L.C., Denk, J., Zickler, G., Bourret, G.R., Saage, H., Huber, O., Hüsing, N., Diwald, O.: Twinning in compression-strained AZ31B magnesium alloy. In: Huber, O., Bicker, M., Patzelt, P. [Hrsg.]: 9. Landshuter Leichtbau-Colloquium - Leichtbau in Forschung und industrieller Anwendung von der Nano- bis zur Makroebene, LC Verlag, Landshut, Februar 2019, ISBN: 978-3-9818439-2-7
  3. Denk, J., Huber, O., Saage, H.: Localized Fatigue Description Method for Strongly Inhomogeneous Strain Distributions in Wrought Magnesium Alloy, Mg2018, Conference Proceedings, London, 24.-27.07.2018
  4. Denk, J., Huber, O., Saage, H.: Influence of strongly inhomogeneous strain fields on the fatigue behavior of wrought magnesium alloys, LightMAT 2017, Conference Proceedings, Bremen, 08.-10.11.2017
  5. Denk, J., Schreiber, C., Huber, O., Saage, H.: Inhomogene Beanspruchungszustände in Magnesiumfeinblechen und Beschreibung des HCF-Verhaltens mit dem Konzept des hochbeanspruchten Volumens. In: Huber, O., Bicker, M., Patzelt, P. [Hrsg.]: 8. Landshuter Leichtbau-Colloquium - Leichtbau grenzenlos, LC Verlag, Landshut, März 2017, ISBN: 978-3-9818439-0-3
  6. Dallmeier, J., Denk, J., Huber, O., Saage, H., Eigenfeld, K.: Energy based fatigue model for magnesium wrought alloys. In: Huber, O., Bicker, M., Patzelt, P. [Hrsg.]: 7. Landshuter Leichtbau-Colloquium - Monolithische und hybride Strukturen für den Leichtbau, LC Verlag, Landshut, Februar 2015, ISBN: 978-3-9812696-6-6
  7. Dallmeier, J., Huber, O., Saage H.: An Experimental Study on Low-Cycle Fatigue Properties and Cyclic Deformation on Sheet Metals of the Magnesium Wrought Alloys ME21, AZ31 and AM50, Euro LightMAT 2013, Conference Proceedings, Bremen, September 2013
  8. Krüger, M., Saage, H., Heilmaier, M., Jain, P., Kumar, K. S., Deformation and fracture of Mo-silicide alloys at ultrahigh temperatures In: Creep and fracture of engineering materials and structures. - The Japan Inst. of Metals, 2012, International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan), 2012.05.27-31
  9. Loretto, M.H., Wu, Z., Chu, M.Q., Hu, D., Saage, H., Microstructure and properties of microstructurally refined cast Ti46Al8Nb and Ti46Al8Ta, Ti 2011 - Proceedings of the 12th World Conference on Titanium, Beijing, China, June 19th-25th 2011
  10. Dallmeier, J., Huber, O., Saage, H.: Untersuchung des Steifigkeits- und Festigkeitsverhaltens der Magnesiumknetlegierungen ME21 und AZ31 in Form von Feinblechen. In: Huber, O., Bicker, M. [Hrsg.]: 5. Landshuter Leichtbau-Colloquium - Leichtbau und nachhaltige Mobilität, LC Verlag, Landshut, Februar 2011, ISBN: 978-3-9812696-1-1, zum Tagungsband
  11. Krüger, M., Saage, H., Heilmaier, M., Böning, M., Kestler, H., Influence of processing on the microstructure and mechanical behaviour of Mo-Si-B alloys, Journal of physics Conference Series . - Bristol : IOP Publ., 2010, Bd. 240.2010
  12. Sturm, D., Heilmaier, M., Saage, H., Aguilar, J., Schmitz, G.J., Drevermann, A., Palm, M.,  Stein, F.,Engberding, N., Kelm, K., High temperature creep behaviour of Al-rich Ti-Al alloys, Journal of physics Conference Series  . - Bristol : IOP Publ. 2010, Bd. 240.2010
  13. Krüger, M.,  Saage, H.,  Heilmaier, M.,  Jéhanno, P.,  Böning, M.,  Kestler, H.,  Shyrska, V.,  Dudka, A.,  Loboda, P., Influence of processing on the microstructure and mechanical properties of Mo-Si-B alloys In: International Conference on High Performance P-M Materials, 17th Plansee Seminar 2009; Vol. 4, Reutte, 2009.05.25-29
  14. Krüger, M., Saage, H., Heilmaier, M., Jéhanno, P., Böning, M., Mechanical properties of mechanically alloyed Mo-Si-B materials for elevated temperature applications In: Macro- to -nano-scale inelastic behavior of materials: plasticity, fatigue & fracture. - Fulton, Md., NEAT Press, ISBN 0-9659463-9-8, 2009, Kongress: International Symposium on Plasticity and its Current Applications 15 (St. Thomas), 2009.01.03-08
  15. Heilmaier, M., Saage, H., Krüger, M., Jehanno, P., Böning, M., Kestler, H.: Current Status of Mo-Si-B Silicide Alloys for Ultra-high Temperature Applications, MRS Proceedings, Warrendale, 2009
  16. Heilmaier, M., Saage, H., Jéhanno, P., Böning, M., Kestler, H.: Superplasticity of multiphase Mo-Si-B alloys, "Mechanics & Mechanisms of Finite Plastic Deformation", Proc. Plasticity '08, A.S. Khan and B. Farrokh (Hrsg.), Neat Press, MD, 2008
  17. Krüger, M., Saage, H., Heilmaier, M., Jéhanno, P., Böning, M.: Enhanced plasticity of mechanically alloyed Mo-based materials for high temperature applications, "Mechanics & Mechanisms of Finite Plastic Deformation", Proc. Plasticity '08, A.S. Khan and B. Farrokh (Hrsg.), Neat Press, MD, 2008
  18. Sturm, D., Heilmaier, M., Saage, H., Paninski, M., Drevermann, A., Schmitz, G.J., Palm, M., Stein, F., Engberding, N.: Mechanische Eigenschaften einer im Schleuderguss hergestellten Al-reichen TiAl-Legierungen, in: 13. Sommerkurs Werkstoffe und Fügen, ISBN 3-929757-22-2
  19. Krüger, M., Saage, H., Franz, S., Heilmaier, M.: Mechanisches Legieren von Molybdän-Basislegierungen für Hochtemperaturanwednungen, in: Berichtsband des 13. Sommerkurses Werkstoffe und Fügen, ISBN 3-929757-22-2
  20. Heilmaier, M., Saage, H., Krüger, M., Jehanno, P., Böning, M., Kestler, H., Drawin, S.: Current status and future trends of Mo-based silicide alloys for ultrahigh temperature applications, JSPS Report of the 123rd Committee on Heat Resisting Materials and Alloys 48, 2007
  21. Heilmaier, M., Saage, H., Jehanno, P., Böning, M., Freudenberger, J.: High Temperature Deformation Behavior of a Mechanically Alloyed Mo Silizide Alloy, in: Advanced intermetallic-based alloys, Warrendale, PA, MRS proceddings 2007
  22. Saage, H., Heilmaier, M.: Untersuchung der Partikelgrößenverteilung in oxiddispersionsverfestigten intermetallischen Legierungen mittels FIB, in: Göken, M. (Hrsg.): Fortschritte in der Metallographie (39. Metallographie-Tagung Erlangen), 2005
  23. Jéhanno, P., Heilmaier, M., Saage, H., Böning, M., Venskutonis, A., Knabl, W.: High Temperature Deformation Mechanisms of Molybdenum Silicides with Molybdenum and Intermetallic Matrix, in: Proc. 16th Int. Plansee Seminar 2005; G. Kneringer, P. Rödhammer, H. Wildner (Hrsg.), Reutte/Tirol, 2005
  24. Heilmaier, M., Saage, H., Eckert, J., Kudashov, D., Martin, U.: Strengthening mechanisms in mechanically alloyed nanostructured ODS metals, Proc. 11th Int. Symposium on Plasticity and its Current Applications ''Plasticity 2005'', A.S. Khan, A.R. Khoei (Hrsg.), Neat Press, Fulton MD, 2005
  25. Saage, H., Heilmaier, M., Grundmann, U., Eckert, J.: Mechanisch legierte oxiddispersionsgehärtete Ag und (Al,Cr)3Ti Legierungen, Berichtsband des 12. Sommerkurses Werkstofftechnik, Universität Magdeburg, 2004
  26. Heilmaier, M., Saage, H., Nganbe, M.: A Critical Assessment of High Temperature Creep and Fatigue of ODS Ni-Base Superalloys, Proc. ASM-Symposium “Processing and Fabrication of Advanced Materials XII”, T.S. Srivatsan, R.A. Varin (Hrsg.), ASM International, Materials Park OH, 2004
  27. Heilmaier, M., Grundmann, U., Saage, H., Eckert, J., Janousek, M.: Novel Oxide Dispersion Strengthened Alloys: Manufacture – Microstructure – Properties, Proc. “2003 Intern. Conf. on Nanotechnology & PM: Scientific Challenges & Commercial Opportunities”, D. Apelian, T.N. Tiegs (Hrsg.), MPIF, USA, 2003
  28. Heilmaier, M., Grundmann, U., Saage, H., Eckert, J.: Novel Oxide Dispersion Strengthened Alloys produced by Mechanical Milling, Proc. ASM-Symposium “Processing and Fabrication of Advanced Materials X”, T.S. Srivatsan, R.A. Varin (Hrsg.), ASM International, USA, 2002
  29. Engelmann, H.J., Volkmann, B., Saage, H., Stegmann, H., Ziesche, S., Zschech, E.: TEM sample preparation using focused ion beam – capabilities and limits, Proc. 15th Int. Congress on Electron Microscopy ICEM, Durban, Vol. 1, 2002
  30. Engelmann, H.J., Blum, W., Saage, H., Worch, M., Zschech, E.: Application of EFTEM for cross-sectional on-product characterization of semiconductor devices, Proc. EUREM 12. Brno, 2000
  31. Saage, H., Heilmaier, M., Eckert, J., Schultz, L.: Microstructural evolution during mechanical milling and consolidation of ODS L12 -(Al,Cr)3Ti, High-Temperature Ordered Intermetallic Alloys VIII. MRS Proc. 552, 1999

 

Book contributions

  1. Freudenberger, J., Göllner, J., Heilmaier, M., Mook, G., Saage, H., Srivastava, V., Wendt, U.: Material science and engineering, in: Springer Handbook of Mechanical Engineering, Berlin, 2008
  2. Saage, H.: Herstellung und Eigenschaften mechanisch legierter oxiddispersionsgehärteter (Al,Cr)3Ti-Legierungen, Dissertation, 2004

Patents

  1. Quentin de Robillard, Holger Saage, Heiko Stegmann, Hans-Jürgen Engelmann, Verfahren zur objektiven und genauen Dickenmessung von dünnen Filmen im mikroskopischen Maßstab, DE10224195B4, US20030222215